Find Out All about Bone China, Porcelain and Ceramic Now!

When facing with the many tableware materials on the market, have you also searched for bone china, porcelain and ceramic? But we found that many articles don't actually make it clear. So here we've compiled a list of relevant questions of interest, so hopefully you can stop looking elsewhere for answers!


PIC: EUNA Lace-Trimmed Plate

Bone china, also called fine bone porcelain, is a kind of ceramic with bone ashes, clay, feldspar material, and kaolin as the basic materials.

Bone china needs to go through two times of firing, high temperature(1250℃) firing, which is also called biscuit firing, and lower temperature(1150℃) firing, also called glaze firing. For decorated bone china products, the firing process is even more complicated, which may reach 3-5 times firing. Typical everyday bone china tableware includes bone china dinnerware, tea sets, coffee sets, cup and saucer sets, cups, etc.


PIC: Blue-And-White Soup Bowl

Porcelain is a ceramic material made by heating substances, generally including materials such as kaolinite, in a kiln to temperatures between 1,200 and 1,400 °C (2,200 and 2,600 °F). The strength, and translucence of porcelain, relative to other types of pottery, arises mainly from vitrification and formation of the mineral mullite within the body at these high temperatures. Though definitions vary, porcelain can be divided into three main categories: hard-paste, soft-paste and bone china.


PIC: EUNA Vintage Pasta Plate

A ceramic is any of the various hard, brittle, heat-resistant and corrosion-resistant materials made by shaping and then firing an inorganic, nonmetallic material, such as clay, at a high temperature. Common examples are earthenware, porcelain, and brick.

Ceramic materials are brittle, hard, strong in compression, and weak in shearing and tension. They withstand chemical erosion that occurs in other materials subjected to acidic or caustic environments. Ceramics generally can withstand very high temperatures, ranging from 1,000 °C to 1,600 °C (1,800 °F to 3,000 °F).

Which one should I choose?


There are so many options to choose from that it can be hard to know whether you’re making the best decision, however, there is no best choice, but right choice that suits your needs. the choice among bone china, porcelain and other ceramic mugs should be made on the basis of occasion and suitability. Bone china mugs are good choices if you aim at high-end market and you want something good,an air of elegance is desired, porcelain mugs are good choices when durability is not a major concern and it’s just for ordinary use. Other ceramic mugs are good choices when practical, sturdy mugs are needed.

Of course, cost is also a major concern. In most cases, bone china is relatively of higher price than porcelain, and porcelain is more expensive than ceramic.

But here in EUNA, you can find both delicate and favorable tableware made by the above three materials, and we guarantee every dinnerware you buy is the most cost-effective one than other merchandise in the market!

Stay tuned if you want to know more information about ceramic tableware, you can share this post if you find anything useful in the article, that would help us to be seen by more visitors who want to know it just like you!

Leave a comment

All comments are moderated before being published